RLC-4 Details
Ports
- 4 - Full duplex ports that can be connected in any combination to all other ports. Ports can operate as links or repeaters connected or stand alone.
Port Functions
- Each port has its own Hang Timer, Time-out Timer, Courtesy Timer, Courtesy Beep, and ID Timer. All the timers are user programmable. All ports can control the RLC-4 with DTMF. There is a separate DTMF decoder on every port. Each port has a COR input, a CTCSS (PL) input, a PTT output, an audio input (1OK ohm), and an audio output (600 ohm). Each port contains a jumperable -6dB/Octave de-emphasis filter for discriminator input.
Input & Output
- 4 - Output Control lines capable of 500mA current sink.
- 3 - Contact Closure inputs capable of 0-15V input voltages.
- 4 - Analog inputs with the ability to read voltages from 0-5V and 0-25V.
- Analog inputs can be calibrated to any input voltage between the above given limits. An offset can be added to the reading from each analog line to compensate for variations in sensors. Each analog input can be alarmed to allow the system to execute commands in a high and low alarm condition.
- Doug Hall RBI-1
The RLC-4 supports the Doug Hall RBI-1 Kenwood remote base control system. This allows the user to remotely change frequency, offset, power and PL of a Kenwood mobile radio. - RLC-ICM (DISCONTINUED)
The RLC-4 supports the Link Communications, Inc. RLC-ICM Icom 900/901 band modules remote base control system. This allows the user to remotely change frequency, offset, power and PL of the Icom 900/901 band modules. The controller supports four separate band modules.
Autopatch Option
- The RLC-4 supports an autopatch option. This feature allows both forward and reverse phone operation, long distance dialing checking, DTMF tone regeneration and remote programming from the phone. Autodial slots are available using up to 50 macros. The autopatch interfaces to 1 of the 4 radio ports.
Serial Port
- RS-232 serial port with user selectable baud rates of 300 - 9600 Baud.
Program Features
- CW response with user adjustable frequency and speed on each port.
- Digital Voice Recorder with 75 seconds of voice storage (Optional)
- 100 macro slots that can contain multiple commands to allow short entry of long sequences. 50 macros are 50 characters in length. 50 of the macros are 20
characters in length and can be used for autodial numbers. - Event triggered commands including user timers.
- DTMF regeneration on the 4th port
- Separate DB-9 connectors for radio ports and RS-232, DB-25 for I/0.
DC Characteristics
- Operating voltage of 11V-15V, with a current draw of 110mA@ 12V.
Options
- 19" rack mount enclosure with LED display.
